Download File INTRO-HD.NET-mTracker.3D.Essentia...

Improved time needed to validate fixture type updates when loading show file Improved fixture buttons showing part names first so they can be easily identified Fixed selecting the group mask using a mask-only fixture group crashing when no fixture groups had been selected Fixed some older show files not allowing to add a DyLOS zone Fixed additional install errors due to large sector size on Windows 11 Fixed screen brightness control on M6

Download File INTRO-HD.NET-mTracker.3D.Essentia...

* Fixture Libraries and CITP Fixed wrong fixture types matching on CITP import from Capture Fixed wrong fixture types/personalities matching on CITP export to Capture Fixed virtual intensity being applied to non-color mixing channels on some types Fixed new fixture types in library update can only be added after restarting software Fixed rendering (color mixing) channels that are not linear across the entire DMX value range Skip fixture with ID 0 (zero) from being imported (from CITP/Capture), which would be auto numbered and cause conflicts (Onyx starts numbering fixtures at 1) Fixed adding fixture types with single quotes (') in the manufacturer, model or personality name Added fixture type rule to prevent software reliability issues after adding certain multi-part types with virtual intensity enabled Added fixture type rule to properly indicate multi-part types with overlapping 2D coordinates can't be added to the show Restored fixture master intensity behavior Fixed updating multi-part fixture types Fixed inability of adding fixtures (of some types) to show files that have been edited in 4.5 Fixed importing DMX addressing (CITP - Capture, Patch export file) when fixture (number) sequence was not addressed adjacently Fixed adding types (stuck in "checking conflicts") when thumbs are missing

* Others Fixed programming issues when using encoder to reach zero while operation mode is absolute (jumping to full) Fixed group mask filter Fixed loading specific show files Fixed touching a patch command in the "Commands" popup also being applied to the underlying grid cell (unintentionally preparing another command) Fixed cue-only issues when using selected filter Color temperature rendering fixes and improvements Selection state in Playback button view is now stored with the view Fixed USB-DMX PCBs losing configuration Fixed hidden subnet mask setting Fixed SNAP+TOGGLE locking to cue 0 when global rate is on Fixed control surface communication issues when 24 fader module is connected Fixed value windows not reflecting channel group assignment changes until restart Fixed REL ALL EXCEPT cue macro feedback Fixed RECORD SCREEN on external display Improved support for touch right-click by holding Fixed load issues for specific older show files Fixed storage of cloned fixtures into fixture groups Fixed cues fades pulsing non-RGB color emitters when override is on Fixed first GO after UPDATE CUE re-executing the updated cue instead of moving to the next one (when "reset to first cue" option is disabled) Fixed SWAP FIXTURE losing DMX addressing (even with identical DMX footprint) Fixed DELAY/FADE command requiring additional "@" key press Fixed recording/assigning submaster banks 101-500 Added configurable default setting for showing custom object colors Updated SQL server for pending security protocol compliance Fixed cue macros (including SET CL VALUE, MIDI notes) not working Fixed loss of preset value for last logical channel after show file upgrade (typically visible in defaults preset): consider loading your pre-4.6 show again! Fixed installer aborting due to IIS installation (which triggers installation of RDM report pages) Fixed missing options due to duplicate names in direct access to parameter Improved Web control sizing (like Art-Net node management) Scroll wheel can now also be used for personalities in the fixture type library browser

New fixture library format This version introduces a new fixture library format, provided by the library partner AtlaBase. This library includes over 50.000 fixture profiles Existing fixtures will remain in the showfile but can be updated using the "Exchange" function in the patch menu User fixtures and the Library Editor are not affected New Fixture Libraries are only available for Version 4.6 and higher

Fixes 2D plan icon corruption when swapping fixtures GO on playback resetting to cue 1 on secondary (in tracking backup) after it turned standalone Art-Net IN loopback issues UI closing after selecting cuelist type when recording to a new cuelist Custom colors on fixtures, types, cuelists, etc UPDATE+UPDATE to referenced preset(s) not updating cue values Cleaning faulty fixture types from show files, preventing adding fixtures when type was fixed DyLOS generator animation DyLOS opacity mapping First fixture in patch not having its opacity mapped correctly Fixture selection focus for multi-part fixtures without a main part LOAD+LOAD using keyboard shortcut Copying between types of Fixture Groups Playback fader (1-10) LEDs on M-Touch, NX Touch while not in "Play" mode Error popup in selected cuelist view when using keyboard shortcut to delete cues Applying additive color FX macros Optimizing show files (removing fixtures that had been marked for deletion) Placing multi-part fixtures on 2D plan Playback status redraw issue when returning from patch M-Play bank issues "push to all" not refreshing on virtual playback panel Back button freezing on "Follow 0s" cues Joining shows Pop-ups appearing multiple times at startup Multiple conditional channels not toggling (for example, Frost disabling 2 prisms on ADJ Focus Beam LED) Deselecting fixture in Capture not deselecting in Onyx Focusing inconsistencies with Capture for P/T inverted/swapped fixtures IP address and numeric up/down entry issues Cloning (default) preset values requiring software restart (DyLOS zone) lockup issues after creating (and under specific circumstances loading) shows on the fly Playback faders 11-20 not working on M1HD (when flipped to the physical faders) DyLOS generator thumbs sometimes not showing when moving show file to other hardware Zone fixtures can no longer be added to the 2D plan as regular fixturesPreformatted text

ONYX Operating Systems are provided as ZIP files. Unzip and use the included ONYX OS tool to create a bootable USB Drive. These are full recovery images and should always be kept with the console.

From the previewer tool. In the previewer tool, choose Scene Viewer >Load File. Select a glb or glTF file and all of its associated files (ora zip file containing these files), and click Open.

Select files from previewer tool. In the previewer tool, choose Scene Viewer >Load File. Multi-select the glb or glTF file and all of its associatedfiles (or a zip file containing these files), and click Open.

This section lets you save preset files and configure some of the settings on your Ultimatte. Simply click the folder icon to save a preset! Plus settings can be copied between different models of Ultimatte 12. You can also view status and configuration by clicking on the small information icon.

You can exclude video or audio clips in any track from previews and export. Clips in excluded video tracks appear as black video in the Program Monitor and in output files. Clips in excluded audio tracks are not output to the Audio Mixer, to the speakers, or to output files.

Excluding a track with the Eye icon does not exclude it from outputs. If excluded tracks hold clips that run before or after clips on non-excluded tracks, black video appears before or after the last clips in the non-excluded tracks. To trim this ending black video from the output files, set the In point and Out point as desired in the Export Settings dialog box.

Alternatively, you can use a third-party application, such as the freeware MediaInfo or GSpot Codec Information Appliance. You can also choose Window > Show Movie Inspector in Apple QuickTime Player to find the codecs used to generate a file.

The DVCPROHD presets included with are for editing material recorded to MXF files with a Panasonic P2 camcorder. Premiere Pro has presets also for AVCHD, XDCAM HD, and XDCAM EX. More HD sequence presets are installed into Premiere Pro when an HD capture card that supports Premiere Pro is installed.

For the highest-quality previews of sequences on an SDI card or device connected to an external monitor, use one of the uncompressed formats for preview files. Uncompressed 8 bit (4:2:2 YUV) is suitable for projects meant for SD output, while Uncompressed 10 bit (4:2:2 YUV) is best for projects meant for HD. Also, with Uncompressed 10-bit (4:2:2 YUV) and high bit-depth color rendering Premiere Pro uses the color information in 10-bit assets and up samples other assets in a sequence to generate 10-bit preview files. Premiere Pro delivers the best preview performance when using these preview file formats on a system with a supported SD-SDI or HD-SDI card installed.

Both these uncompressed formats do subsample video files at 4:2:2 YUV. Unlike the other file formats available for preview files, they do not then run the video data through a compressor. They are called uncompressed because they do not add this second layer of compression. And hence retain much higher color depth in the previews than the compressed formats. Therefore, uncompressed preview files can be quite a bit larger than compressed preview files. 041b061a72